Your beautifully gift wrapped box comes with:
- Your expertly finished wooden flower bar
- Beautiful blooms to fill every hole in the bar (plus extras)
- Flower wires (great if you want to make a stem taller or a stem doesn't fit in the hole)
OPTIONAL: Wall mount kit
Due to the natural nature of the flowers, very occasionally the stem of a particular flower may be too large for the hole.
If this is the case, all you have to do is insert a small cutting of the included wire into the bottom of the stem and you're good to go!
It's ever so simple!
The flowers are individually organised in their packaging making it easy to separate the stems.
You can either follow the pictures on or website, look at the review pictures to see what great ideas our community have or go rogue and create a truly one-of-a-kind masterpiece yourself!
For 30cm bars and up
Things you will need:
- Screwdriver / hand drill
- Level
- Pencil
- Tape measure
1. Lay your bar so the back that side to be attached to the wall is facing the ceiling
2. Measure your bar and mark the middle point with a pencil
3. Measure 10cm from the mid point on both sides and mark these points with the pencil
4. Line the bracket up on the base of the bar (bottom of the bracket should be flush with the bottom of the back of the bar) and align the inside screw holes with the 10cm marks
5. Screw the brackets to the wood
6. Find the middle point on the wall where you want to hang the bar. Mark and measure 10cm either side of this point (note: ensure these points are level)
7. Line up the inner screw holes of the bracket and mark on the wall where the outer holes line up
8. Drill small holes in the wall so the plug will fit
9. Attach brackets to wall
10. Slide the wooden bar onto the wall!
Simply click on contact us and we will get back to you within a few hours to help with any issues!